Pipe Heating Cable of UL
-
Price:
Negotiable
- minimum:
- Total supply:
-
Delivery term:
The date of payment from buyers deliver within days
-
seat:
Jiangsu
-
Validity to:
Long-term effective
-
Last update:
2017-12-29 00:17
-
Browse the number:
252
+
Jiangyin Senphus Electrical Material Co., Ltd.
- Contactaixin:
Mrs. Senphus(Mr.)
- Email: telephone: phone:
-
Arrea:
Jiangsu
Address:No.8, Taoyuan Road, Huangtu Chengchang Industrial Park, Wuxi, Jiangsu, China 214445
- Website:
+
Pipe Heating Cable of UL
Feature
1. voltage 110v to 120v
2.Length 0.91m to 24.38m etc
3.offer manual.
4.2 feet power line.
Frost-proof water pipes with this heating cable
Antifreeze Water Pipe Heating Cable Specification
Installation:
1 first unwind the heating cable. The cable must never be connected to the power line when it is wound up.
2 if the cable is too inflexible because of low temperatures, unwind it and put it for some minutes into the plug.
3 afterwards you can pass the cable.
4 the area around the pipe where you want to connect it with the cable must be accessibly and non-attached.
5 the heating cable can not be passed behind walls
6 put the thermostat with the round black contact area tightly on the coolest point of the pipe and fix it with insulating tape.
7 finally put the whole cable on the pipe and fasten it every 30~60cm with insulating tape.
8 attention: the cable must be fastening straight on the pipe
9 now you can check if your cable works.
10 afterwards insulate the water pipe and the heating cable with mineral rock wool or foam. Attention: never use more than 13mm of this material to insulate.
11 in general the heating cable must be protected against mechanical damage or biting.
12 the heating cable can not be put into liquids.
13 finally plug the cable into a 230V main plug.
We can do this product without thermostats(6 to 13 degree), because there are very heavy snow in winter in some Europe place, then the customers need more heat pipe heating cable, and we suggest the pipe heating cable without thermostats one.
Feature
1. voltage 110v to 120v
2.Length 0.91m to 24.38m etc
3.offer manual.
4.2 feet power line.
Model | Power Watt |
Ohm | Length M |
Length FT |
Amps | Thermostat ±3ºC |
Power line | Color | Diameter ±0.3mm |
Joint processing |
SHPT-7W-3FT(120V) | 21 | 685.7 | 0.91 | 3 | 0.2 | 6ºC-13ºC | American indiator plug L=2ft | Black | 5.0*13.2 | Injection |
SHPT-7W-6FT(120V) | 42 | 342.9 | 1.83 | 6 | 0.4 | 6ºC-13ºC | American indiator plug L=2ft | Black | 5.0*13.2 | Injection |
SHPT-7W-12FT(120V) | 84 | 171.4 | 3.66 | 12 | 0.7 | 6ºC-13ºC | American indiator plug L=2ft | Black | 5.0*13.2 | Injection |
SHPT-7W-18FT(120V) | 126 | 114.3 | 5.49 | 18 | 1.1 | 6ºC-13ºC | American indiator plug L=2ft | Black | 5.0*13.2 | Injection |
SHPT-7W-20FT(120V) | 140 | 102.9 | 6.10 | 20 | 1.2 | 6ºC-13ºC | American indiator plug L=2ft | Black | 5.0*13.2 | Injection |
SHPT-7W-24FT(120V) | 168 | 85.7 | 7.32 | 24 | 1.4 | 6ºC-13ºC | American indiator plug L=2ft | Black | 5.0*13.2 | Injection |
SHPT-7W-30FT(120V) | 210 | 68.6 | 9.14 | 30 | 1.8 | 6ºC-13ºC | American indiator plug L=2ft | Black | 5.0*13.2 | Injection |
SHPT-7W-40FT(120V) | 280 | 51.4 | 12.19 | 40 | 2.3 | 6ºC-13ºC | American indiator plug L=2ft | Black | 5.0*13.2 | Injection |
SHPT-7W-60FT(120V) | 420 | 34.3 | 18.29 | 60 | 3.5 | 6ºC-13ºC | American indiator plug L=2ft | Black | 5.0*13.2 | Injection |
SHPT-7W-80FT(120V) | 560 | 25.7 | 24.38 | 80 | 4.7 | 6ºC-13ºC | American indiator plug L=2ft | Black | 5.0*13.2 | Injection |
Frost-proof water pipes with this heating cable
calibre |
15mm |
22mm |
28mm |
35mm |
42mm |
48mm |
60mm |
76mm |
Without pipe insulation |
-20°C. |
-13°C. |
-10°C. |
-7°C. |
-5°C. |
-4°C. |
-3°C. |
-2°C. |
With 13mm pipe insulation |
-45°C. |
-45°C. |
-40°C. |
-40°C. |
-35°C. |
-30°C. |
-25°C. |
-20°C. |
Antifreeze Water Pipe Heating Cable Specification
Installation:
1 first unwind the heating cable. The cable must never be connected to the power line when it is wound up.
2 if the cable is too inflexible because of low temperatures, unwind it and put it for some minutes into the plug.
3 afterwards you can pass the cable.
4 the area around the pipe where you want to connect it with the cable must be accessibly and non-attached.
5 the heating cable can not be passed behind walls
6 put the thermostat with the round black contact area tightly on the coolest point of the pipe and fix it with insulating tape.
7 finally put the whole cable on the pipe and fasten it every 30~60cm with insulating tape.
8 attention: the cable must be fastening straight on the pipe
9 now you can check if your cable works.
10 afterwards insulate the water pipe and the heating cable with mineral rock wool or foam. Attention: never use more than 13mm of this material to insulate.
11 in general the heating cable must be protected against mechanical damage or biting.
12 the heating cable can not be put into liquids.
13 finally plug the cable into a 230V main plug.
We can do this product without thermostats(6 to 13 degree), because there are very heavy snow in winter in some Europe place, then the customers need more heat pipe heating cable, and we suggest the pipe heating cable without thermostats one.