Particle Board Cabinets

Production Description

Particle board cabinet is easily gouged or scratched, however, this is not as much of an issue if it is protected by wood veneer or laminate.

Behind the cherry, birch, or maple doors of a kitchen cabinet is the wood used to construct the cabinet box—the back, sides, top, shelves, and bottom. There are usually two options for cabinet box construction: plywood and particle board. Plywood is made up of layers of wood veneer glued together, alternating the grain of the wood for stability. Particle board (also known as furniture board) is made of wood fibers glued and pressed together, sometimes using a mold. Each material has benefits to consider.

Particle board cabinet has its own advantages, including greater dimensional stability: it does not warp due to temperature fluctuations and other changes in the environment. Most notably, particle board costs less than plywood. Particle board is often made of scraps of wood that are considered waste. Many plywood manufacturers also make particle board from the leftovers. Because of this, particle board is less expensive. By using particle board, one can save between 8% and 12% on the cost of cabinets.

A major downside to particle board cabinet is its lack of moisture resistance. If moisture is absorbed through the end grain, particle board will swell—for example, if water on the floor comes into contact with the unfinished bottom edge of a cabinet box. To address this potential problem, we seals the ends of all particle board pieces with edge banding. The installer may also seal the bottom edges of cabinet boxes with a clear coat when installing them. Plywood, though more water resistant, is also not very durable in continually wet conditions.

Particle board quality depends on the size of the particles that make it up, the glue that holds it together, and the density of the board. Because particle board can be made out of a lot of wood waste, its quality can vary quite a bit. Smaller particles make the board better quality, denser, and heavier. One of the best kinds of particle board is medium density fiberboard (MDF), which is high quality, but can be very heavy, making it difficult to hang large cabinets.

Production Parameter

No.	Product Name
1	Door panel
2	Six-way adjustable soft close hinge
3	18mm thick plywood shelve, with melamine laminate on both sides
4	ABS adjustable leg
5	Back panel with plywood frame
6	18mm thick side panel, with melamine laminate on both sides
7	16mm thick plywood bottom panel and end panel of drawers
8	Toekick made of aluminum alloy or matching door panel material
9	Easy-to-install cam lock system

Side Panel, Shelving, and Bottom Panel

18mm thick plywood board with creamy white color melamine laminate on both sides and PVC edge banding of matching color.

Drawer Panel

All bottom panel and end panel of drawers use 16mm thick plywood board, with creamy white color melamine laminate on both sides and PVC edge banding of matching color.

Back Panel

18mm thick plywood frame with 3mm thick plywood back panel of matching color, reinforced with nails and glue.

Drawer and Baskets

Full extension soft close drawer glides.

World class brands from BLUM, HETTICH, KESSEBOHMER, VAUTH-SAGEL and many more.

Hinge

Six-way adjustable 95° degree opening soft close hinges, easy to install

About us

Emoohome has established good cooperation with first-line suppliers such as Formica, Wilsonart, schattdecor, blum, Dtc, etc. It produces more than 700 containers annually, and produces more than 6000 sets of cabinets and wardrobe solutions every year. We provide integrated design and customization services for customers in the United States, South Africa, the United Kingdom, Spain, Chile, South America, Thailand, and the Philippines. Its products are well received by customers all over the world.

The factory covers an area of more than 25000 square meters, over 100 employees, advanced processing equipment, modern automatic production system, professionals and perfect management system, and design team.

Customer Service

With over 10 professional and perfect designer team to analyze the cabinet layout design, no matter your order is personal use or projects, you can easily choose your style, develop your design, check our construction details, select products and accessories that you are satisfied with.

Shipping & Packing

Supply us with a design sketch

If you have already sketched out your ideas, send them to our team of specialist furniture consultants via email or by using our online template. We will then configure your specifications and provide you with an offer for your unique furniture piece.

http://www.emoohome.com/